Specifications

www.dometic-waeco.com Contents, specifications and availability are subject to change serving the technical improvement.
130
MagicSpeed CBI
You want to retrofit an analogue accessory, but your
vehicle has a digital CAN bus system? Go ahead, it’s no
problem at all with the CAN bus interface from WAECO!
The module ensures a smooth data flow between the
analogue and digital technologies.
More and more vehicles are equipped with the CAN bus
technology. This also means that all of their comfort
functions are controlled by digital signals from the
CAN bus system. The problem is many retrofit products
require analogue signals. This is easily solved by fitting
the WAECO CAN bus interface. The module “translates”
the digital CAN bus signals into analogue impulses and
transmits them to the retrofitted accessory.
The CAN bus interface is suitable for use with many
WAECO comfort and safety accessories (see the picture
series on the top right-hand page). It can also be used
for similar products of other makes, as most of them
will require an analogue speed or rev signal.
The WAECO interface also paves the way for built-in
navigations systems.
The WAECO CAN bus interface also makes vans
fit for analogue aftermarket products. It is com-
patible with most commonly used models built by
Citroën, Fiat, Ford, Iveco, Mercedes-Benz, Nissan,
Peugeot, Renault and Volkswagen.
A complete list of vehicle models is available at
www.waeco.com/en/cbi100
The digital-analogue translator
For running analogue retrofit products in CAN bus vehicles
NEW