Technical data

Connecting the IU0U automatic charger PerfectCharge
42
9 Connecting the IU0U automatic
charger
a
Caution
The IU0U automatic charger may only be connected by a qualified
specialist.
The following information is intended for technicians who are famil-
iar with the guidelines and safety precautions to be applied.
Observe the following safety instructions for the electrical connections:
e
z Caution, risk of short circuit
Always use sockets which are grounded and secured by resid-
ual current circuit breakers.
z If you have to feed cables through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
z Do not lay cables which are loose or bent next to electrically
conductive material (metal).
z Fasten the cables securely.
z Do not pull on the cables.
z Do not lay the 230 V mains cable and the 12/24 V DC cable in
the same duct.
z Lay the cables so that they cannot be tripped over or damaged.
9.1 Connecting the IU0U automatic charger to a battery
(fig. 8, page 7)
d
Warning
Avoid coming into contact with the battery fluid.
e
Caution
Batteries with a cell short circuit may not be charged, as explosive
gases may form due to overheating of the battery.
_PerfectCharge_IU152A-IU254A.book Seite 42 Mittwoch, 26. März 2008 4:48 16