Technical data

47
marine.dometicgroup.com
230 V › 12 V
230 V › 24 V
Chargers
NEW! WAECO PerfectControl MPC 01
Intelligent battery management system with display and a
battery sensor
Input voltage: 8 – 16 volts
Current consumption: 150 mA in display mode, 10 mA in
standby mode
CIS bus interface
Three additional battery sensors (accessory) can be connected
Display dimensions (W x H x D): 130 x 115 x 6 mm
Installation frame dimensions (W x H x D): 150 x 136 x 16 mm
(included in scope of delivery)
Ref. No. 9102500041
Optional extra
Hella Sensor MCA-HS1 // Ref. No. 9102500038
WAECO PerfectCharge
MCA 1215
Battery outputs: 1 plus 1 A
output for starter battery
Charging current: 15 A
12 V // Ref. No. 9102500027 //
UK 9102500046
WAECO PerfectCharge
MCA 1235
Battery outputs: 2 plus 1 A
output for starter battery
Charging current: 35 A
12 V // Ref. No. 9102500029 //
UK 9102500048
WAECO PerfectCharge
MCA 1225
Battery outputs: 2 plus 1 A
output for starter battery
Charging current: 25 A
12 V // Ref. No. 9102500028 //
UK 9102500047
WAECO PerfectCharge
MCA 1250
Battery outputs: 3
Charging current: 50 A
12 V // Ref. No. 9102500030 //
UK 9102500049
WAECO PerfectCharge
MCA 1280
Battery outputs: 3
Charging current: 80 A
12 V // Ref. No. 9102500031 //
UK 9102500050
WAECO PerfectCharge
MCA 2425
Battery outputs: 3
Charging current: 25 A
24 V // Ref. No. 9102500033 //
UK 9102500052
WAECO PerfectCharge
MCA 2415
Battery outputs: 2
Charging current: 12,5 A
24 V // Ref. No. 9102500032 //
UK 9102500051
WAECO PerfectCharge
MCA 2440
Battery outputs: 3
Charging current: 40 A
24 V // Ref. No. 9102500034 //
UK 9102500053
Exact battery
analysis
It doesn‘t miss a thing: the intelligent battery sensor, which
comes with the PerfectControl MPC 01, measures the
e ective current and voltage of the batteries connected. It
uses these to calculate the capacities and charge status.
When the battery is discharged or faulty, it triggers a warning
and the command to disconnect the battery from the load
circuit. It also helps WAECO PerfectCharge battery chargers
unfold their full potential. The battery sensor adapts the
charging voltage to the respective battery characteristics,
giving a particularly fast and optimal charge.
NEW:
Information
and opera t ing
panel
Comfort
bus
Multiplex box
(included
in scope of
delivery)
Starter battery Supply battery
Battery sensorBattery sensorBattery sensor
Supply battery
WAECO
PerfectControl MPC 01
M A C
I/O box
Charger