Instruction manual

EN
CoolFreeze Operation
31
CDF36, CDF46
Operating panel and connection socket (fig. 3, page 3, fig. 5, page 4):
6 Operation
6.1 Before initial use
I
Item Description Explanation
1ON
OFF button
Switches the cooler on or off when the button is
pressed for between one and two seconds
2 POWER Status indication
LED lights up green: Compressor is on
LED lights up orange: Compressor is off
LED flashes orange: Display switched off auto-
matically due to low battery
voltage
3 ERROR LED flashes red: Device is switched on but
not ready for operation
4 SET Selects the input mode
– Temperature setting
– Celsius or Fahrenheit display
– Set battery monitor
5 – Display, shows the information
The first three digits of the four-digit display show the
temperature, the fourth digit shows the temperature
unit (°C or °F).
6 ADJUST Press once to increase the value
Press once to decrease the value
NOTE
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and maintenance” on
page 38).