User manual

- Retract the lifting part of the servomotor, position the original rod to ”lock”.
- Fasten the rod to the original rod by means of a clamp.
Attention! Pay attention to a precise setting
- When the door is locked or unlocked with the door key, the servomotor should actuate
the central locking system at half course of the key (see diagram).
- Repeat the setting of the connecting rod if necessary.
Adjustment central locking rod to original rod
1/2
1/2
15
manual ml-22/44 29.06.2004 8:32 Uhr Seite 17