User manual

Tools required
The following are required
for installation:
- Measure
- Prick punch
- Hammer
- Drill bits
- Drill
- Screwdrivers
The following are required for the
electrical connections and testing:
- Diode test lamp or voltmeter
- Crimping pliers
- Insulation tape
- Heat shrinkable tubing
- Hot blow drier
- Soldering iron
- Solder
For securing the receiver and
cables, you may also need bolts,
metal screws and cable binders.
Prick
punch
Measure
Hammer
Set of screwdrivers
Voltmeter
or
Crimping
pliers
Diode testlamp
Set of drill
bits
Drill
Hot
blow dri-
Soldering
iron
Solder
13
manual ml-22/44 29.06.2004 8:32 Uhr Seite 15