Owner`s manual

Wadia 9 Series Decoding Computer System Owner’s Manual

SAFETY PRECAUTIONS

To get the best performance from your Wadia 9 Series Decoding Computer system,

and for your own safety, please read and follow these important safety instructions.

1. Before operating the Wadia 9 Series Decoding Computer system please read all of

the operating and safety instructions.

2. Never place the Wadia 9 Series Decoding Computer system near heat sources

such as radiators, fireplaces, stoves, or other appliances that produce heat. Avoid

placing the Wadia 9 Series Decoding Computer system where it will be subject to

direct sunlight or low temperatures.

3. This product is equipped with a three prong IEC power inlet that includes an earth

ground connection. To prevent shock hazard, all three connectors must always be

used. If your electrical outlets will not accept this type of plug, an adapter may be

purchased. If an adapter is necessary, be sure it is an approved type and that it is

used properly, supplying an earth ground. If you are not sure of the integrity of your

home’s electrical system, contact a licensed electrician for assistance.

4. AC extension cords are not recommended for use with this product. If an

extension cord must be used, be sure it is an approved type and has sufficient

current carrying capacity to power this product.

5. Before cleaning the Wadia 9 Series Decoding Computer system, always disconnect

the power supply cord. Use a soft cloth and, if necessary, dampen with clean water

or mild cleaning agent. Never apply water, or any other cleaner, directly to the

chassis.

6. If you smell smoke, or an abnormal smell, immediately unplug the Wadia 9 Series

Decoding Computer system from the power supply and contact your Wadia dealer.

7. Never attempt to service the Wadia 9 Series Decoding Computer system beyond

what is described in this Owner’s Manual. All service should be performed by

qualified service personnel.

8. Unplug unit if it becomes wet.

9. Do not open unit when attached to AC outlet.

10. Replace fuse only with the exact type originally included:

100 volt: 1 amp Slo-Blo (1 fuse)

120 volt: 1 amp Slo-Blo (1 fuse)

220 volt: 1 amp Slo-Blo (2 fuses)

240 volt: 1

amp Slo-Blo (2 fuses)

11. Do not attempt to repair or modify your Wadia 9 Series Decoding Computer

system.