Owner`s manual

Wadia 9 Series Decoding Computer System Owner’s Manual
26
Configuring Inputs
The 931 Digital Controller Inputs can be configured to be:
• On or Off
• ClockLink On or Off
• Custom Input Name
• Configure Input Enabled or Disabled
If you intend to use an input, configure it as enabled. Disabling an input will shut off
all associated circuitry. Inputs that are disabled cannot be selected during operation.
As shipped from Wadia, all inputs are configured as Enabled. ClockLink is on for
input 1 and turned off for all other inputs.
How to do it:
To configure and input on or off, navigate to the Configure Input Enabled/Disabled
screen. Select the desired setting (Y or N) using the right and left controls on the
front panel, then press the enter key to go to the next screen.
Inputs:
• Input 1 - GFO
• Input 2 - GFO
• Input 3 - BNC
• Input 4 - BNC
• Input 5 - Toslink
• Input 6 – XLR/AES
Configuring Input ClockLink On or Off
If you are using a source equipped with Wadia’s ClockLink, you must configure the
input to which it is connected to accept ClockLink. If a digital source does not have
ClockLink, the input to which it is connected must be configured to disable ClockLink.
Note: using a non-ClockLink source with an input configured for ClockLink will result in
degraded sound quality.
As shipped from the Wadia factory only input 1 is preset with ClockLink enabled
How to do it:
To configure an input for ClockLink, navigate to the Configure Input ClockLink
screen. Make your selection using the right and left keys, then press the enter key to
go to the next screen.
Input 4 Cl ockLinked
?
y /n