Specifications

4
Installation and Set-up
Unpacking
Use care in unpacking your Wadia 971 CD Transport. Inspect it for any shipping damage and call your dealer
immediately if any is found.
Do not plug your Wadia 971 CD Transport into an AC outlet if you find shipping damage.
We advise saving all packing materials so that the unit can be easily and safely shipped if the need arises.
Accessories
Provided with the Wadia 971 CD Transport are the following accessories:
• AC power cord
• Three tip-toes with threaded studs
• Three steel coasters
• RCA/BNC adapter
• Remote Control
• Two type AAA batteries
• Glass Fiber-optic cable
Do not tip the unit onto the back panel. This can damage input and/or output connectors.
Installing the Tip-Toes
With the unit still positioned on its side, screw one of the tip-toes under each of the three recesses in the bottom
of the 971 CD Transport.
Position the Wadia 971 CD Transport where you would like it to reside in your system. We recommend choosing
a solid, non-resonant, level surface for best performance. If this surface is susceptible to damage, place one of
the steel coasters under each tip-toe.
!
971CD T ransport
!