Specifications

Changing Between Screens
Pressing the ENTER key will cause the display to change to the next display screen. As you continue to press
the enter key, the display will “scroll” through all available display screens, then return to the beginning. The
order of the display screens is:
1. Main Status Screen
2. Emphasis Screen (displays whether disc is recorded using pre-emphasis)
3. Configure Output 1
4. Configure Output 2
5. Configure Output 3
6. Configure ClockLink
7. Configure Resolution Enhancement
Remote Control Operation
The Wadia 971 CD Transport remote control requires two type-AAA batteries, which you will find in the accessories
kit. To install the batteries, remove the battery cover on the back of the remote by sliding it towards the bottom
of the remote. Insert the batteries as indicated on the battery holders.
Turning Display On/Off
By pressing the Display On or Off button, the Wadia 971 CD Transport display can be turned off completely.
Program / Transport Time Mode
Repeat / Single Track Repeat
Direct
0
Drawer Open/Close / Search Back
Pause / Play
Stop / Track Back / Track Forward
Display On/Off
Balance Left/Right*
Enter
Mode
Input*
+ 10** / Phase Invert*
Search Forward / Mute*
Volume Up/Down*
* These buttons are used to control
a Wadia Decoding Computer
** Use before selecting any track
greater than nine (see below)
12
971CD T ransport