Specifications

18
Inverting the Phase
The Wadia 121Decoding Computer has the ability to invert absolute phase in the
digital domain. Pressing the Phase button on the remote control will cause the Wadia
121Decoding Computer to invert phase; pressing it again will switch the phase
back to normal. When the phase LED is illuminated phase inverting is activated.
Headphone Output
The Wadia 121Decoding Computer provides a 1/4” headphone jack on the front
of the unit. The headphone output is driven by Wadia’s SwiftCurrent Class A
amplification stage. The Wadia remote control volume buttons control headphone
volume. Wadia provides 2 selectable sensitivity adjustments to best match
the system with a wide variety of headphones. To optimize headphone output
sensitivity use the following sequence of commands:
1 Press the four step command PLAY
PLAY
PLAY
PLAY. The USB LED
will begin to flash, indicating the headphone adjustment mode is active.
The Phase LED will show the current status of the headphone section
output sensitivity. The LED will be on for high sensitivity or off for low
sensitivity output.
2 Press PLAY to change headphone output to match low sensitivity
headphones.
3 Press PLAY to change the headphone output to match high sensitivity
headphones.
Features
32-bit/1.4MHz up sampling using Wadia’s proprietary DigiMaster
algorithm and filtering technology
All inputs accept up to 24-bit/192kHz input data rates
Asynchronous USB input
Wadia DirectConnect analog output with 32-bit Digital Volume Control
Digital Inputs: AES/EBU (XLR), Coaxial (RCA and BNC),
Toslink Optical, USB B
Analog Outputs: one pair balanced (XLR), one pair unbalanced (RCA)
Analog reference output level is fully adjustable via IR commands
to properly match with system sensitivity
Single ended and balanced analog outputs can be used
simultaneously
Wadia SwiftCurrent current to voltage output stage creates a
Class A output
Headphone output stage utilizes SwiftCurrent technology and
dedicated output amplifiers to drive almost any headphone
Full featured aluminum IR remote control
7
121_Manual_Print_03-12:Layout 1 3/30/12 9:41 AM Page 18