Specifications
17
Adjusting the Balance
Relative volume of each channel can be adjusted via the balance control buttons
on the remote. Each time one of the balance buttons is pressed, the volume on
that channel is increased relative to the other channel. As the balance is adjusted,
one channel or the other is alternately decreased. This corresponds to a 0.5dB
change as the overall volume level (the sum of the two channels) remains constant
within 0.5dB. When adjusting the balance, the volume LED display on the front
panel will indicate the current balance setting. When the upper three LEDs are
illuminated, the balance is set to the right. When only the lower three LEDs are
illuminated, the balance is set to the left. The system is balanced when both of
the center LEDs are illuminated.
Mute
The Wadia 121Decoding Computer has a mute setting that electronically reduces
the output to zero. The mute section is also engaged:
• Each time the Wadia 121Decoding Computer is powered-up
• When the mute button is pressed
When the Wadia 121Decoding Computer is in Mute Mode, the front panel will
indicate this by flashing the bottom volume LED.
Installation
Unpacking
Use care in unpacking your Wadia 121Decoding Computer. Inspect it for any
shipping damage and call your dealer immediately if any is found.
Do not plug your Wadia 121Decoding Computer into an AC outlet if you find
shipping damage.
We advise saving all packing materials so that the unit can be easily and safely
shipped if the need arises.
Do not tip the unit onto the back panel. This can damage input and/or
output connectors.
Accessories
Provided with the Wadia 121Decoding Computer are the following accessories:
• Power Cord
• Power Adaptor
• USB Thumb Drive
• Remote Control
Installing Battery in Remote Control
The Wadia 121Decoding Computer remote control will ship with the required
battery preinstalled. However, you will have to remove the plastic insert tab
from the battery to allow operation of the remote.
8
121_Manual_Print_03-12:Layout 1 3/30/12 9:41 AM Page 20