Installation & Assembly

5 of 8

Step 6

Step 7

Cover the bottom of the Seat(C) with the non-woven fabric.

Smooth down the Magic Tape on all four sides of the Seat by hand.

Add or remove Gasket (①) where needed to achieve stability

Note:The use of Gasket (①) are OPTIONAL and is especially useful to help alleviate slight

wobbleness.Some Legs may need more than on Washer Ring whilst some Legs may not need any.

Position Loveset right side up and test for stability.

Install the Legs(E) into the bottom of the Seat(C) by placing a Gasket(①) onto the threaded stem of the

Legs.

And then insert the threaded stem into the threaded mounting position at each Corner of the Bottom of

the Seat(C).

Tighten by turning the Legs clockwise.

Note: The use of Gaskets(

①

) are OPTIONAL and are especially useful to help alleviate slight

wobbles. Some Legs may need more than one Gasket whilst some Legs may not need any.

Position Sofa right side up and test for stability on a Level Surface.

Add or remove Gaskets(①) where needed to achieve stability.

Test for stability