Installation & Assembly

4 of 8
Step 3
Lay the Seat(C) on a flat surface as shown in the picture.
3.1 Insert the Screw Arbor(② of the Backrests(B) into mounting positions of Seat(C).
3.2 Attach Backrests(B) to Seat(C) using Flat Washers(③), Spring Washers(④) and Nuts(⑤), with
Spanner(⑥) as pictured above.
Do not fully tighten the Nuts.
Lay the Seat(C) on a flat surface as shown in the picture.
Insert the Screw Arbor(②) of the Right Armrests(A2) into mounting positions of Seat(C).
Attach Right Armrest(A2) to Seat(C) using Flat Washer(③), Spring Washers(④) and Nuts(⑤), with
Spanner(⑥) as pictured above.
Repeat the same step to install the Left Armrest(A1) .
Tighten all Nuts at all joints in a sequential manner until fully secure.
Step 5
Step 4
C
C
C
A2
E
B
C
①
E
E
B
Step 3.1
Step 3.2
A1