Installation Instructions

2
4
2
CERTIFICATION: ETL DRY
3
MAKE WIRE CONNECTIONS
Gently pull the supply wires through the hole in the
crossbar. Connect the black supply wire to the black
fixture wire. Secure with the supplied wire nuts.
Connect the white supply wires to the white
fixture wire. Secure with the supplied wire nuts. Either
wrap the green wire around one of the protruding screws
or connect it to the supply ground wire. Secure all wire
with electrical tape (not supplied).
Tuck all wires carefully into the J-Box.
MOUNT FIXTURE TO THE CROSSBAR PLATE
Position the canopy over the crossbar plate.
Align the hole in the centre of canopy and secure with the
supplied thumb screws.
SECURE THE STRAIN RELIEF
Adjust the lenght of fixture and secure with the supplied
strain relief screw.