Owner Manual

Page 4 OF 6
Step 4
Step 5
Step 6
Insert the connector on the Back Left Side (C) and Back Right Side (D) into
the connector on the Backrest Panel (A).
Push firmly down on Back Left Side (C) and Back Right Side (D) to esure
they are fully locked into position.
Press the Back Left Side (C) and the Back Right Side (D) forcefully to
ensure that they are fully locked in place.
With assistance from your adult partner, lift the Backrest Panel (A) and insert the
Connectors on the Backrest Panel (A) into the Connectors on the Seat Base (B).
Push firmly down on Backrest Panel (A) to esure it is fully locked into position.
Upzip the pouch at the bottom of Seat Base(B).
Attach Backrest Panel(A) and Seat Base(B) by using Bolt(①). Tighten the
bolt completely by your hand.
Then close the pouch.
Seat Base (B)
Backrest Panel (A)
Bolt (①)
Back Right Side(D)
Back Left Side(C)
Backrest Panel(A)
Seat Base(B)
Seat Base (B)