Assembly Instructions

44 pcs.
44 pcs.
16 pcs.
16 pcs.
12 pcs.
4 pcs.
Flat Washer
Lock Washer
Nut Øm6
Short KD. Bolt Øm6x 40mm.
Allen Wrench
4 pcs.
Key Wrench
Long KD. Bolt Øm6x 75mm.
A
Description
Ltr
B
C
D
E
F
G
Chair Floor Glide
Chair Parts Key
6
7
8
16 pcs.
Chair Back4 pcs.
Complete Seat
4 pcs.
Right Facing Front Leg4 pcs.
Detail A Detail B
E
* Quantities noted are for a tolal of four chairs.
- Carefully lay chair back flat on a smooth flat surface to
prevent scratches.
- Affix the complete seat to chair back, as shown in Detall
A, using a flat washer, lock washer and short KD bolt.
- Secure complete seat to chair back corners, as shown in
Detail B, using a flat washer, lock washer and long KD
bolt. - - Tighten screws with provided Allen Wrench.
STEP 1
STEP 2
8
FABRIC CARE INSTRUCTION
REGULAR CARE:
Wlpe gently using a soft damp cloth and
mid deter gent DO NOT SATURATE.
FABRIC CONTERT:
1OO% p/u vinyl; Cleaning code "W"
7
6
MADE IN VIET NAM
Table Hardware
Ltr Qty Description
A
B
C
D
8 pcs
8 pcs
8 pcs
1 pc
Flat Washer
Lock Washer
Nut Øm6
Key Wrench
1
2
3
4
4 pcs.
4 pcs.
4 pcs.
1 pc.
TableFloor Glide
Leg
Corner Block
Table top
Detail A
-Carefully lay table top upside down on
a smooth flat surface to prevent scratches.
-Affix a leg to each corner of the table top as shown
in Detail A using a flat washer , lock washer and nut .
-Once all legs are in place, fully tighten the nuts
STEP 1
9
8
11
10
12
5
Detail C
- Carefully turn Chair upside down and attach each Leg to the front corners of the
Complete Seat. Noting Right and Left Side Leg.
- Place Flat Washer, Lock Washer and Nut on for each bolt, using provided Key
Wrench.
- Do not fully tighten the Nuts at this stage until all the parts are in position (See
Detail C).
- Insert 2 Side Stretchers between the Front Legs and Back Legs(Noting Right and
Left Side Stretcher), and insert the Front Stretcher between the Front Legs; fasten
with Wood Screw using phillíp-head screwdriver. (not provided).(See Detail D)
- Be sure to tighten all screws and nuts prior to using Chair.
24 pcs.
Screw Ø4 x 38mm
H
9
Left Facing Front Leg4 pcs.
10
Right Facing Side Stretcher
4 pcs.
11
Left Facing Side Stretcher4 pcs.
12
Front Stretcher4 pcs.
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
5 PACK TABLE & CHAIRS
5-Pack Hardware Kit
5-Pack Hardware Kit
Chair Hardware
Table Parts Key
No
Qty
Description
No
Description
5