Owner Manual

4
TO USE MASSAGE CONTROL
This massage chair is designed with 8 vibration motors and
soothing heat function at the lumbar area.
To engage the massage press the POWER button. Change the
mode, zone, intensity, and heat as desired.
You can also switch to the auto setting by pressing the AUTO
button. This will cycle through the modes at one minute each.
For the manual setting, press any one of the zone buttons. You
may now manually select which zones to engage up to all 4 at
once. (NOTE: pressing the MODE button takes you back out of the
manual setting)
Five levels
of INTENSITY
Turn POWER on
before adjusting
settings
Press HEAT to
activate heat
in lumbar area
Nine massage
MODES
Four massage
ZONES
Set TIMER at
10, 20, or 30
minutes.
This screen
shows the time
remaining.
Black Controller Plugs
Black Power
Adapter Plugs
Red Plugs
White Plugs
SAFETY AND MAINTENANCE
Do not use the massage motors for more than 60 minutes
at a time. Always unplug the power adapter when massage
is not in use.
If you have any health concerns about using the massage
feature, consult your physician.
Do not use the massage motors when wet.
To clean the upholstery, unplug the adapter, and spot clean
with leather or vinyl cleaner.
Use the chair to seat only one person at a time.
If the massage does not work, make sure all connections
OTHER INFORMATION
It is normal for the massage motors to be somewhat loud,
especially on high intensity.
The heater produces only a mild heat. It is not designed to get
very hot.
TIMER
MODE
INTENSITY
1
2
3
4
5
1
2
3
4
5
6
7
8
9
HEAT
POWER
TIMER
AUTO
MODE
INTENSITY
BACK
LEG
THIGH
LUMBAR
TIMER
MODE
INTENSITY
1
2
3
4
5
1
2
3
4
5
6
7
8
9
HEAT
POWER
TIMER
AUTO
MODE
INTENSITY
RELA
ZEN
BACK
LEG
THIGH
LUMBAR
FUNCTION INSTRUCTIONS
TO ENABLE MASSAGE FUNCTION
s
the RED plugs together and then the WHITE plugs together. Finally, plug the power adapter into a standard power outlet.