Top Storage Bench Assembly Instructions P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts. V. The provided glue is to secure wood dowels in place.
Parts List 1 3 6 7 8 5 4 2 2 2 2 P.
Hardware List A Ø8x30mm Wooden dowel 18 pcs B Ø6x35mm Cam bolt 12 pcs C Ø15x11mm Cam lock 12 pcs D Ø30mm Sticker 12 pcs Handle 4 pcs E F Ø4x22mm Handle Bolt 4 pcs G Ø4x38mm Screw 6 pcs H Ø6x12mm Bolt 16 pcs J M4 Hex key 1 pc Hinge 3 pcs Screw 32 pcs M Hinge 1 pc N Hinge 1 pc P Glue tube 1 pc K L Ø4x12mm Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly.
Step 1 A A A A 7 A A A F A A F A A 8 F F A E A A E Insert wooden dowel (A) into parts (7,8), then using Handle bolt (F) secure Handle (E) into part (8) with Philips head Screwdriver as per diagram. P.
Step 2 A A 4 A A Insert wooden dowel (A) into part (4) as per diagram. P.
Step 3 B 5 B 6 B B B B B B B B B B Secure Cam bolt (B) into parts (5,6) with Philips head screwdriver as per diagram. P.
Step 4 8 G 7 G 4 G G G G Using screw (G) attach part (4) into parts (7,8) with Philips head screwdriver as per diagram. P.
1 Step 5 2 3 C 5 4 C C C 5 8 C 4 C 7 Using cam lock(C) secure part (5) to parts (4,7,8) with Philips head screwdriver as per diagram. . P.
1 Step 6 2 3 C 6 4 C C C 6 8 C 4 C 7 Repeat the last step as per diagram. P.
Step 7 2 4 2 2 2 2 H H H H J Using bolt (H) attach part (2) to part (4) with Hex key (J) as per diagram. P.
Step 8 D D Place sticker (D) cover the holes as per diagram . P.
Step 9 L L K K L 3 K L K Using Screw (L) attach Hinge (K) to part (3) with Philips head screwdriver as per diagram. P.
Step 10 L L K 3 K L K 7 L K K L Using Screw (L) attach Hinge (K) to part (7) with Philips head screwdriver as per diagram. P.
Step 11 3 L L N 6 L L 5 L M 3 3 L K K Using screw (L) attach hinge (M,N) to parts (3,5,6) with Philips head screwdriver as per diagram. If the gap between the part (3) and side panels need to be adjusted, please first loosen the screws fixing hinge (K) to the part (3).Finally adjust one side of the side panel up or down, and then lock the hinge (M,N). P.
Step 12 1 Put part (1) as per diagram. . P.
Step 13 Final Assembly . P.
