Owner Manual

8
NOTE: We recommend that two capable adult perform this procedure.
STEP 6A. With you or someone holding the glass panel, remove the two screws at the top edge of
the fireplace with a Phillips (+) screwdriver. Fig 1.
STEP 6B. Together, carefully remove the front glass panel and set it aside on a clean soft
surface.Fig 2.
STEP 6C. Place the decorative pebbles (D) on the fireplace ledge in any desired position. Fig 3.
STEP 6D. Align the tabs of the glass panel with the holes on the top edge of the fireplace. Thread
the screws back into the holes and tighten them both with a Phillips screwdriver.Fig 4. 5
Fig 1.
Fig 2.
Fig 3.
Fig 4.
Fig 5.
Pebbles
Glass panel