Owner Manual

6
E
E
B
B
B
B
B
B
B
B
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating. Failure to do so could result in electric shock, fire, or personal injury.
E
A
A
STEP 5. A. With the help of a capable adult, lift the fireplace (A) and align the hooks on the back of
the fireplace with the slots on the wall bracket. Carefully set the hooks into theslots.
B. Secure the fireplace to the wall bracket with two ST 5x10 metal screws, one on each side.
Thread the screws through the fireplace and into the wall bracket side tabs. Tighten both screws
with a Phillips screwdriver. The unit may now be plugged in.
STEP 4. Take off the wall bracket from the
back of fireplace box and store the
screwsas you will need to screw back.
Align the holes in the wall bracket (E) with
the pilot holes and drywall anchors. Thread
wood screws (B) through washers and
holes in the wall bracket, then directly into
the wall studs and/or drywall anchors.
Make sure bracket is level. Tighten all
screws securely with ascrewdriver.