Owner Manual

1. Prepare 6 bolt assemblies by applying a lock washer (#C) onto

the bolt (#A) then a flat washer (#D) onto that same bolt (#A).

2. Carefully place the headboard (#1) onto the top of the H/board legs (#2). Insert

4 bolt assemblies into each end of the legs (#2) and secure using the Allen wrench (#D).

1. Insert 2 threaded studs (#F) into the holes along the sides

of the headboard (#1) and footboard (#4). Turn right to tighten.

2. Apply each

end of the side

rails (#5) onto

those threaded

studs (#F).

3. Apply a hex nut (#G)

then a beveled washer

(#H) onto the threaded

studs (#F). Secure the

washer using the wrench.

#B x 6 pcs