Installation & Assembly

ManualsBrandsWade Logan ManualsBedsLow Profile Standard Bed

headboard & side rails hardware

headboard components

(1) Headboard

(2) wings (2) metal legs

(4) 1” x ¼” bolts

(8) 2” x 5/16” bolts

(26) 1¼” washers

(10) 1” x 5/16” bolts

(4) ¼” nuts

You will need:

• phillips screwdriver

• at head screwdriver

• pliers

*Open all hardware packets

before proceeding

LIMITED WARRANTY

PLEASE DISPOSE OF PLASTIC BAG (S) AND

CARTON (S) RESPONSIBLY.

headboard/bed

Assembly Instructions

If you have any questions, please call us

We guarantee its upholstered furniture

against defects in construction for a period of

one (1) year. When a structural defect is

brought to our attention, we will repair or

replace it at our option at no charge to the

customer (includes parts and labor, not

transportation costs). Fabric wearability for

upholstered furniture is not covered by the

warranty. Vacuum for regular cleaning.

Summary of content (6 pages)

PAGE 1
h ea d b o ar d / be d Assembly Instructions headboard components (1) Headboard (2) wings (2) metal legs headboard & side rails hardware You will need: (8) 2” x 5/16” bolts (10) 1” x 5/16” bolts (4) 1” x ¼” bolts • phillips screwdriver • flat head screwdriver • pliers *Open all hardware packets before proceeding (26) 1¼” washers (4) ¼” nuts If you have any questions, please call us LIMITED WARRANTY We guarantee its upholstered furniture against defects in construction for a period of one (1)
PAGE 2
bed components (2) side rails for all sizes (4) legs for all sizes support rails (1) Twin/ Full/ Queen (3) King/California King support legs (1) Twin (2) Full (3) Queen (6) King/California King (4) corner brackets (2) end rails for all sizes (1) upholstered foot rail (2) upholstered side rails for all sizes for all sizes for all sizes bed hardware 1” x ¼” bolts (1) Twin (2) Full (3) Queen (6) King/California King (4) ¾” x 5/16” bolts (4) ¾” washer (8) ¾” screws (2) L Brackets for all sizes
PAGE 3
Step 1 1 Attach each wing to headboard using: 1. (1) 2” x 5/16” bolt and (1) 1¼” washer 2. (1) 2” x 5/16” bolts and (1) 1¼” washer 2 3. (1) 2” x 5/16” bolts and (1) 1¼” washer 4. Repeat process for the other wing. 3 Step 2 Insert metal legs through the holes in the headboard. Make sure that you place the correct leg facing “Out.” Attach each metal leg to the headboard using (2) 1” x 5/16” bolts and (2) 1¼” washers for each leg.
PAGE 4
Step 3 1. Attach side rail and end rail to corner bracket. Make sure to align holes and snap into thinner slot. Continue this action until you have a rectangular frame. 1 2. Attach corners to rails using (8) ¼” bolts and (8) ¼” nuts. 2 3. Attach legs to rails using (4) ¾” x 5/16” bolts and (4) ¾” washers.
PAGE 5
Step 4 1. Attach each support bar using (2) ¼” bolts and (2) ¼” nuts. Make sure to attach the support bar underneath the bed frame. 1 Note: Twin/ Full/ Queen = 1 support bar King/California King = 3 support bars 2. Attach each support leg to the bar using (1) 1” x ¼” bolts and (1) ¾” washer. 2 Note: Twin = 1 support leg Full = 2 support legs Queen = 3 support legs King/California King = 6 support legs.
PAGE 6
Step 6 1-2 1. Use (6) 1” x 5/16” bolts, (6) 1 ¼” washers to attach rails to bed frame loosely. Screw in side rails before attaching the foot rail. 3 2. Push side rails towards foot rail, so that there is no gap. (Queen bed frame image displayed) 3. Use (2) 2½” x 5/16” bolts and (2) 1 ¼ washers for the top hole (see image). Begin final tightening of all bolts. Step 7 With a phillips screwdriver, attach (2) L brackets and (8) ¾” self-tapping screws in the corners of the foot rail.