Assembly Instructions (Table)

6 / 7

I. Align the bracket (#G) with the pre-

drilled holes of the leg (#2).

II. Secure the brackets (#G) using the

Allen wrench (#F) to tighten the 4

bolts (#A) to lock them with the leg

(#2).

III. Repeat the process above for the

remaining 3 legs.

X 4

Part

Hardware

I. Align the shelf (#3) with the pre-drilled holes of the 4 legs (#2).

II. Prepare 8 bolt assemblies by inserting FIRST the lock washer

(#E) onto the bolt (#C) and then the flat washer (#D) onto the

SAME bolt (#C), in that order.

III. Insert the bolt assemblies through the holes of the shelf (#3) and

secure those bolts using the Allen wrench (#F) to lock them with

the 4 legs (#2).

Part

Hardware

Turn right (clockwise) to tighten