ASSEMBLY INSTRUCTIONS EASY 1/8 DIFFICULT
Thank you for your purchase! We hope you enjoy this new addition to your home for many years to come. Our commitment to providing quality products does not simply end when you purchase our product. We fully stand behind our products from start to finish. We can help with assembly questions as well as, if necessary, replacing damaged or missing parts. To help expedite our service, please have these assembly instructions readily available, along with your order receipt.
/8
/8
COUNTER HEIGHT CHAIR PARTS #1 1pc #2 1pc #3 1pc #4 1pc Backrest w/Legs Seat Right Front Leg Left Front Leg #5 1pc #6 1pc #7 1pc Front Leg Support Right Leg Support Left Leg Support HARDWARE #A 2pcs #B 4pcs #C 4pcs #D 10pcs Bolt ∅ 5/16" x 1-3/4" Bolt ∅ 5/16" x 2" #F 1pc Bolt ∅ 5/16" x 3-1/4" #G 1pc Flat Washer ∅ 5/16" Lock Washer ∅ 5/16" Allen Wrench Wood Dowel Wood Screw #E 10pcs 5/8 #H 6pcs
Insert the front leg support (#5) into the right front leg (#3) and the left front leg (#4). 1 Part Part Part #3 #5 #4 Note: Right and left are determined by facing the front of the chair in the upright position. 2 Part Part Part Part Hardware Hardware #5 Hardware Hardware I. Place the seat (#2) facing down on a protected surface. Insert a wood dowel (#G) into the center hole of the seat (#2). II. Align the assembled front legs with the pre-drilled holes of the seat (#2). III.
3 Part Part Part Hardware Hardware Hardware I. Insert the right leg support (#6) into the right front leg (#3) and insert the left leg support (#7) into the left front leg (#4). II. Align the backrest with legs (#1) with the wood dowel (#G) and the other ends of the leg supports. III. Prepare 2 bolt assemblies by inserting FIRST the lock washer (#E) onto the bolt (#A) and then the flat washer (#D) onto the SAME bolt (#A), in that order. IV.
5 Turn right (clockwise) to tighten Hardware #4 #5 #7 Secure all the leg supports with 6 wood screws (#H) using a Phillips screwdriver to lock them with the backrest with legs (#1), the right front leg (#3) and the left front leg (#4). #2 #1 6 Carefully place the completed chair in the upright position. Make sure the chair is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened.
