Owner Manual

5
6
8 / 8
Hardware
Secure all the leg supports with 6 wood
screws (#H) using a Phillips screwdriver
to lock them with the backrest with legs
(#1), the right front leg (#3) and the left
front leg (#4).
Turn right (clockwise) to tighten
#4
#7
#5
#2
#1
#H
Carefully place the completed chair in
the upright position. Make sure
the chair is rested on a flat surface
and does not feel loose or wobbly.
If it does, double check that the
bolts/screws are secured and properly
tightened.