Owner Manual

7 / 8

Part

Turn right (clockwise) to tighten

I. Insert the right leg support

(#6) into the right front leg

(#3) and insert the left leg

support (#7) into the left front

leg (#4).

II. Align the backrest with legs

(#1) with the wood dowel (#G)

and the other ends of the leg

supports.

III. Prepare 2 bolt assemblies by

inserting FIRST the lock

washer (#E) onto the bolt (#A)

and then the flat washer (#D)

onto the SAME bolt (#A), in

that order.

IV. Insert the bolt assemblies through the holes near the wood

dowel (#G) of the seat (#2) and secure those bolts using the

Allen wrench (#F) to lock them with the backrest with legs (#1).

Part

Hardware

I. Prepare 4 bolt assemblies by

inserting FIRST the lock washer

(#E) onto the bolt (#C) and then

the flat washer (#D) onto the

SAME bolt (#C), in that order.

II. Insert the bolt assemblies through

the corner holes of the seat (#2)

and secure those bolts using the

Allen wrench (#F) to lock them

with the backrest with legs (#1).

Hardware

Turn right (clockwise) to tighten