Owner Manual

ManualsBrandsWade Logan ManualsBar FurnitureMeader 27" Counter Stool

1

2

3

4

5

6

7

1

2

6 / 8

#D

Part

Part

Hardware

Hardware

Hardware

#5

Part

Part

Hardware

I. Place the seat (#2) facing down on a

protected surface. Insert a wood

dowel (#G) into the center hole of

the seat (#2).

II. Align the assembled front legs with

the pre-drilled holes of the seat (#2).

III. Prepare 4 bolt assemblies by

inserting FIRST the lock washer (#E)

onto the bolt (#B) and then the flat

washer (#D) onto the SAME bolt

(#B), in that order.

IV. Insert the bolt assembly through the

corner holes of the seat (#2) and

secure those bolts using the Allen

wrench (#F) to lock them with the

right front leg (#3) and the left front

leg (#4).

Turn right (clockwise) to tighten

#2

#F

#B

#E

#3

#5

#4

Insert the front leg support (#5) into the right

front leg (#3) and the left front leg (#4).

Note: Right and left are determined by facing the

front of the chair in the upright position.

Part

Part

Part