Installation & Assembly

Secure all the leg supports with 6 wood
screws (#H) using a Phillips screwdriver
to lock them with the backrest with legs
(#1), the right front leg (#3) and the left
front leg (#4).
Page 7 of 7
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
Turn right (clockwise) to tighten
Carefully place the completed chair in the upright position. Make sure
the chair is rested on a flat surface and does not feel loose or wobbly.
If it does, double check that the bolts/screws are secured and properly
tightened.
#H x 6 pcs
#3
#4