Installation & Assembly

I. Insert the right leg support

(#6) into the right front leg

(#3) and insert the left leg

support (#7) into the left front

leg (#4).

II. Align the backrest with legs

(#1) with the wood dowel (#G)

and the other ends of the leg

supports.

III. Prepare 2 bolt assemblies by

inserting FIRST the lock

washer (#E) onto the bolt (#A)

and then the flat washer (#D)

onto the SAME bolt (#A), in

that order.

IV. Insert the bolt assemblies

through the holes near the

wood dowel (#G) of the seat

(#2) and secure those bolts

using the Allen wrench (#F) to

lock them with the backrest

with legs (#1).

Page 6 of 7

Turn right (clockwise) to tighten

#A x 2 pcs

#D x 2 pcs

#E x 2 pcs

Turn right (clockwise) to tighten

#C x 4 pcs

#D x 4 pcs

#E x 4 pcs

I. Prepare 4 bolt assemblies by inserting FIRST the lock washer

(#E) onto the bolt (#C) and then the flat washer (#D) onto the

SAME bolt (#C), in that order.

II. Insert the bolt assemblies through the corner holes of the seat

(#2) and secure those bolts using the Allen wrench (#F) to lock

them with the backrest with legs (#1).