Installation & Assembly (Queen)

DISASSEMBLY
39
!
1
Remove the mattress.
2
Remove the slats.
By removing the mattress,
the bed frame will rise quickly.
3
Unscrew the facades
(screws VR-215).
VR-215
4x
* Qualied person: It is necessary to have a good understanding of the wall anchors that were used during the original installation on your wall
structure of wood, metal, masonry or any other type of wall. If you don't have the necessary skills, make sure that the disassembly is done by
someone who has the qualications and required knowledge, and that he or she follows the required steps. When you choose the installer, make
sure to comply with all applicable regulations in the province, state or country where the furniture is installed.
Important information to read before starting the disassembly.
Keep this information for future reference.
IMPORTANT WARNINGS
Bed may tip over and you may be seriously injured if you don't follow these instructions.
• Only a qualied person * must proceed with the disassembly of the wall bed, as well as the
reinstallation and any possible adjustment.
• Improper disassembly of the wall bed may cause serious injuries to the installer as well
as the people near the bed.
THE BED SHOULD REMAIN ANCHORED TO THE WALL FOR THE FOLLOWING STEPS (1 TO 9).
!
IMPORTANT: THE BED SHOULD REMAIN ANCHORED TO THE WALL FOR THE FOLLOWING STEPS (1 TO 9).
We are released from any responsibility and will void the warranty if the disassembly is not performed according to the instructions in
this manual. We and our distributors (and their respective ocers, directors, agents and servants) shall not be liable or obligated in
any manner for any direct, punitive, exemplary, special, indirect, incidental or consequential damages of any kind, regardless of the
form of action, whether in contract, tort, negligence, strict product liability or otherwise, arising out of or in connection with improper
anchoring of the bed or non-compliance to the anchoring procedure of this document.