User Manual

WADE Antenna Inc.
29 Sharp Road
Brantford, Ontario, N3T 5L8 Canada
Tel: [phone]
Fax: [phone]
WADE
Antenna, Inc.
[phone]
[e-mail]
www.wadeantenna.com
This rugged omni-directional antenna can be cut to any
channel from 2 to 13. Other frequencies are available on
request. Output impedance is 75 Ohm with a standard “F”
connector. It is also available with “N” connector and 50
Ohm impedance.
OMNI-DIRECTIONAL
VHF ANTENNA
• CFM2- *
SPECIFICATIONS:
ElEctrical
Specification CFM2- *
FREQUENCY RANGE 54 - 220 MHz (Specify channel)
CHANNELS 2 To 13 (available on request)
GAIN (dBi) -1 dBi
IMPEDANCE 75 Ohm
VSWR 2.0:1 (Max.)
MAXIMUM POWER 100 Watts
CONNECTOR 75 Ohm - "F"
50 Ohm - "N" (on request)
MOUNT 1.5 TO 3" I.D. U-BOLT
WEIGHT 15 Lbs. (CH. 2)
5 Lbs. (CH. 13)
A qualified structural engineer should be consulted prior to mounting an antenna on a tower or a support structure.
Printed in Canada 2005
WADE A NTENNA L TD . 1-800-463-1607
www.wade-antenna.com
OMNI-DIRECTIONAL
VHF ANTENNA
MODEL:
CFM2- *
This rugged omni-directional antenna can be cut to
any channel from 2 to 13. Other frequencies are
available on request. Output impedance is 75 Ohm
with a standard "F" connector. It is also available
with "N" connector and 50 Ohm impedance.
TURNSTILE ANTENNA
ELECTRICAL AND MECHANICAL SPECIFICATIONS
* -2MFCSNOITACIFICEPS
)lennahc yficepS( zHM 022 - 45EGNAR YCNEUQERF
)tseuqer no elbaliava( 31 oT 2SLENNAHC
iBd 1-)iBd( NIAG
mhO 57ECNADEPMI
).xaM( 1:0.2RWSV
sttaW 001REWOP MUMIXAM
"F" - mhO 57ROTCENNOC
50 Ohm - "N" (on request)
TLOB-U .D.I "3 OT 5.1TNUOM
)2 .HC( .sbL 51THGIEW
5 Lbs. (CH. 13)
* SPECIFY FREQUENCY OR CHANNEL
B-4
MECHANICAL SPECIFICATIONS
MODEL WIND LOAD AREA (SQ. FT.) THRUST
(LBS.) TORQUE (FT. - LBS.)
NO ICE 1" RAD. ICE NO ICE 1" RAD. ICE NO ICE 1" RAD. ICE
CFM2-2 1.34 4.62 48.3 41.6 142.3 122.6
CFM2-3 1.18 4.07 42.5 36.6 110.3 95.0
CFM2-4 1.09 3.75 39.3 33.8 94.0 80.8
CFM2-5 0.93 3.20 33.5 28.8 68.4 58.8
CFM2-6 0.86 2.97 31.0 26.7 58.8 50.6
CFM2-FM 0.80 2.74 28.8 24.7 50.4 43.2
CFM2-7 0.41 1.42 14.8 12.8 13.4 11.6
CFM2-8 0.40 1.37 14.4 12.3 12.6 10.8
CFM2-9 0.38 1.33 13.7 12.0 11.6 10.2
CFM2-10 0.38 1.33 13.7 12.0 11.6 10.2
CFM2-11 0.38 1.33 13.7 12.0 11.6 10.2
CFM2-12 0.35 1.19 12.6 10.7 9.6 8.1
CFM2-13 0.35 1.19 12.6 10.7 9.6 8.1
MEcHaNical
MODEL
WIND LOAD AREA (SQ. FT.)
THRUST (LBS.) TORQUE (FT. - LBS.)
NO ICE 1" RAD. ICE NO ICE 1" RAD. ICE NO ICE 1" RAD. ICE
CFM2-2
1.34 4.62 48.3 41.6 142.3 122.6
CFM2-3
1.18 4.07 42.5 36.6 110.3 95.0
CFM2-4 1.09 3.75 39.3 33.8 94.0 80.8
CFM2-5 0.93 3.20 33.5 28.8 68.4 58.8
CFM2-6 0.86 2.97 31.0 26.7 58.8 50.6
CFM2-FM
0.80 2.74 28.8 24.7 50.4 43.2
CFM2-7
0.41 1.42 14.8 12.8 13.4 11.6
CFM2-8
0.40 1.37 14.4 12.3 12.6 10.8
CFM2-9
0.38 1.33 13.7 12.0 11.6 10.2
CFM2-10 0.38 1.33 13.7 12.0 11.6 10.2
CFM2-11 0.38 1.33 13.7 12.0 11.6 10.2
CFM2-12 0.35 1.19 12.6 10.7 9.6 8.1
CFM2-13 0.35 1.19 12.6 10.7 9.6 8.1
* Specify frequency or channel