Installation Guide

ManualsBrandsWaddell ManualsBracketsTwo-Way Bracket - 3 in. x 7 in. x 5 in. - Sanded Unfinished Red Oak - Countersunk and Pre-Drilled - DIY Shelving Bracket

Install Shelving Brackets

STEP-BY-STEP INSTRUCTION

Tools and Materials

Waddell Brackets, Screw Hole Plugs, Stud Finder, Pencil, Level, Tape Measure, Drill, Wood Screws

WADDELL Manufacturing Company waddellmfg.com sales@waddellmfg.com 800-433-1737

Plan shelf placement. Locate and mark

wall studs using a pencil.

Use a level and tape measure to mark

bracket locations.

Place bracket on wall and mark all four

mounting holes.

Drill pilot holes and attach wall anchors

(if necessary). Insert screws with drill.

Continue until bracket is secured

by all four screws.

Insert screw hole plugs.

Place shelving.

Enjoy!

Waddell accepts no liability whatsoever for the safety, reliability, durability, and performance of any of our companies' products when used in a manner

exceeding the maximum load guidelines or for the use/misuse of the tools used during installation.

Summary of content (1 pages)

PAGE 1
STEP-BY-STEP INSTRUCTION Install Shelving Brackets Tools and Materials Waddell Brackets, Screw Hole Plugs, Stud Finder, Pencil, Level, Tape Measure, Drill, Wood Screws 1 2 3 Plan shelf placement. Locate and mark wall studs using a pencil. Use a level and tape measure to mark bracket locations. Place bracket on wall and mark all four mounting holes. 4 5 6 Drill pilot holes and attach wall anchors (if necessary). Insert screws with drill. Continue until bracket is secured by all four screws.