Installation Guide

Install Woodworker Table Legs
using Corner Plate Hardware
STEP-BY-STEP INSTRUCTION
Tools and Materials
Tabletop, Waddell Table Legs, Waddell Corner Plate Hardware, Waddell Skirt Fastener Hardware, Skirting,
Wood Screws, Pencil, Drill, 5/23" Drill Bit, Phillips Head Screwdriver, 1/2" Wrench, Sander, Miter Box and Saw
WADDELL Manufacturing Company waddellmfg.com [e-mail] 800-433-1737
See Waddell Woodworker Mount Leg
Video for skirting, skirt fastener,
and corner plate hardware
installation instruction.
1
Mark placement with a pencil,
drill a 9/32" hole about 1-1/4" deep on
the chamfer edge.
2
Position table leg.
3
Attach table leg to corner plate with
hanger bolt and nut.
4
Tighten with wrench.
5
Success!
6
Helpful Resource: Waddell Woodworker Mount Leg Installation video
Waddell accepts no liability whatsoever for the safety, reliability, durability, and performance of any of our companies' products when used in a manner
exceeding the maximum load guidelines or for the use/misuse of the tools used during installation.