User manual

9
Warning! Always remember that a plug with bared connectors is dangerous if in contact
with a live socket. This appliance must be earthed. Connect the non-rewireable power cord
supplied to the back of the power supply and plug it into the nearest wall plug. Use only a 3
lugs grounded plug, for safety and noise reasons. Replacement mains leads can be obtai-
ned from your Wadax retailer. To get the best sound of the preamplifier, avoid any multiple
plugs or extension cords.
Warning! Take care to always handle the cable by the connectors. Never twist the cable ex-
cessively or attempt to connect or disconnect the connector by handling the cable body in
place of the connector. Connect the cabling from the power supply output to the preamplifier
input point labeled “Power”.
Warning! The next stage in setting up your Wadax PRE1 is to connect your sources, power
amplifiers and other peripheral devices. All devices should be disconnected from mains
power until safe.
SETUP AND INSTALLATION
CONNECTIONS