User manual

7
The Wadax PRE1 has been especially designed to minimize vibration effects on the audiocircuits. The
preamplifier has been designed with four adjustable conical feet. These are used to ensure proper vi-
bration transmission to the preamplifier support in order to evacuate all detrimental vibrations inside
the unit, following Wadax Mechalock fundamentals.
SETUP AND INSTALLATION
CHOICE OF PREAMPLIFIER LOCATION
If the line voltage provided is not appropriate as supplied, please consult your dealer.
ATTENTION: At the 220V position, the Wadax PRE1 preamplifier will function properly for main
line voltages between 200V and 240V. At the 110V position, the main line must deliver between
105 and 125V. If your main supply operates out of these tolerances, please consult your Wadax
dealer.
This fuse is located on the power cord receptacle and can be accessed by raising the cover
using a small screwdriver when the power cord has been removed (ensuring power is discon-
nected before handling). Use a 2.5A slowblow fuse. Always ensure that the fuse cover is fitted.
WARNING!