User manual

The PRE1 Phono has 2 sets of stereo ouputs:

1. Advanced RIAA: the reconstruction has an improved time alignment . This is to compensate for the com-

mon time distortion footprint during the cut process. (Output 1). This is how the PRE1 is delivered from the

factory.

2. Full RIAA spec compliant curve, following Wadax musical reconstruction approach (Output 2).

NOTE: Each output is available BOTH on single ended and balanced. The output signal is the same.

NOTE: If you require more output level, power is doubled on the balanced output..

Phono output connections

SETUP AND INSTALLATION

PRE1 PHONO ■ OUTPUTS (FOR STOCK, UNCUSTOMIZED UNITS)

Output 2 Output 1 Output 2 Output 1

Right Channel Left Channel