User manual

To change VOLUME / BALANCE / MUTE: The right-hand volume level

adjustment knob is used to adjust VOLUME. If volume is set to a value of

zero, outputs will be muted.

To change BALANCE from left to right, the remote control will be needed. For

this there are BAL keys on the RC1 control. Press the MUTE to mute output..

To enter SETUP: Press SETUP key on the RC1 Remote control.

The display will show SETUP. Use VOL UP/DOWN key to move between

different SETUP options. Once a SETUP option is on display, to enter fur-

ther options press the OK key. Use VOL UP/DOWN keys to change values

and press OK again to set it. This value is saved in the internal memory

of the PRE1 and will remain even though power supply is turned off. Press

EXIT key to go back to SETUP menu options.

SETUP AND INSTALLATION

RC1 REMOTE CONTROL