User`s manual

APPENDICES
Page 127
Contents
Index
For AutoCAD Release 13:
1. Start AutoCAD. From the DRAWING EDITOR, open the OPTIONS menu and select CONFIGURE.
2. From the C
ONFIGURATION window, select option #4 CONFIGURE DIGITIZER. Type Y to select another
digitizer.
3. From the list of available digitizers, type the number of the Wintab Compatible Digitizer. Type 0 (zero)
to exit the drawing editor. Then type Y to keep the configuration changes.
4. Decide from which device AutoCAD will accept input. From the D
RAWING EDITOR, open the OPTIONS
menu and select P
REFERENCES. Select the SYSTEM tab and choose an option from the DIGITIZER INPUT
section.
D
IGITIZER. The AutoCAD drawing editor only accepts input from Intuos.
D
IGITIZER/MOUSE. The AutoCAD drawing editor accepts input from both Intuos and your mouse.