User`s manual

HAVING TROUBLE?
Page 85
Contents
Index
GENERAL PROBLEMS
Double-clicking is difficult. Be sure you are quickly tapping the tablet twice in the same place on
the tablet’s active area.
Wacom recommends using the side switch to double-click (review the
techniques in Clic
king).
Try increasing the D
OUBLE-CLICK DISTANCE or reducing the double-
click speed (see Adjusting Doub
le-Click).
Try using a lighter T
IP PRESSURE FEEL (see Adjusting Tip Feel).
The Graphire2 Pen selects
everything, will not stop
drawing.
Open the Wacom control panel and go to the tool’s T
IP FEEL tab.
Move the T
IP PRESSURE FEEL slider toward FIRM, or select the MORE
O
PTIONS button and increase the CLICK FORCE setting.
The eraser selects everything
or will not stop erasing.
Open the Wacom control panel and go to the E
RASER FEEL tab. Move
the E
RASER PRESSURE FEEL slider toward FIRM, or select the MORE
O
PTIONS button and increase the CLICK FORCE setting.
You notice a screen delay at
the beginning of pen strokes.
In the Wacom control panel, try decreasing the D
OUBLE-CLICK
D
ISTANCE or increasing the double-click speed (see Adjusting Double-
Click). If that does not work, try unchecking the DOUBLE-CLICK ASSIST
checkbox.