User's Manual
Table Of Contents
- Your interactive pen display
- Installation
- Working with the interactive pen display
- Customizing
- Troubleshooting
- Appendix
- Caring for the interactive pen display
- Replacing the pen tip
- Using an alternate mount or stand
- Uninstalling the interactive pen display
- Managing preferences
- Installing multiple tablets
- Pen and digital ink capabilities in Windows
- About the Windows Tablet PC Input Panel
- Product specifications
- Product information
- Ordering parts and accessories
- Available parts and accessories
- Radio and television interference
- Precautions
- Warranty (Worldwide, Except for Europe, Africa and Middle East)
- Licence warranty conditions (Europe, Africa and Middle East)
- Glossary
69
Index
Contents
69
Index
Contents
Interactive pen display
TABLET
POWER ADAPTER
PEN (MODEL UP-817E)
The pen model included with your product may vary.
PEN (MODEL UP-818E)
The pen model included with your product may vary.
Reading technology Electro-magnetic resonance technology
Active area 346.232 x 195.536 mm
Resolution 0.01 mm/point
Accuracy ± 0.5mm (center)
Edge area 1
(20mm wide from edge of display area) to be ± 2.0mm
Edge area 2
(3mm wide from edge of display area) to be ± 4.0mm
Reading height 5 mm
Maximum report rate 133 points/sec (TBC)
Pressure levels 512 levels
Communication interface USB
Input voltage 100 to 240 VAC, 50/60 Hz
Output voltage 12 VDC, 3.5 A (max)
Pressure levels 512
Pen tip travel 0.2mm(0.04 in) approximately
Eraser tip travel 0.2mm(0.04 in) approximately
Physical dimensions (L x D) 147.5 x 12.5 mm (5.81 x 0.49 in)
Weight 12 g (0.42 oz), approximately
Side switch type Rocker switch
Pressure levels 512
Pen tip travel 0.2mm(0.04 in) approximately
Eraser tip travel 0.2mm(0.04 in) approximately
Physical dimensions (L x D) 147.5 x 12.5 mm (5.81 x 0.49 in)
Weight 12 g (0.42 oz), approximately
Side switch type Rocker switch