Operation Manual

Index

Contents

Index

Contents

Interactive pen display

ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when the interactive

pen display is first connected. If some portion of text appears blurred, use the A

UTO ADJUST option to

automatically synchronize to the incoming signal (see factory presets, auto-sync, and user settings

). If the

image is still blurred, adjust pitch and phase by following the below procedure. For optimum display

quality, set your video card to the maximum (native) resolution that can be used with your pen display.

See the product specifications

for details.

1. In the Wacom Tablet control panel, select

the C

ALIBRATE tab.

2. If you are working with multiple displays,

be sure the option corresponding to the

pen display is selected in the M

ONITOR

menu.

3. Click on the C

ALIBRATE... button to

activate the calibration screen.

4. Using the OSD controls

, open the OSD

menu and select the P

ITCH option.

Then adjust the pitch level so the pattern

of fine vertical stripes displays evenly.

5. In the OSD menu, select the P

HASE

option. Adjust the phase level so the

adjustment pattern shows clearly.

6. After completing these adjustments,

press the E

NTER and MENU buttons to exit

the OSD menu.

7. Click on the C

ANCEL button or press ESC

to exit the calibration screen.

Adjustment pattern for pitch and phase.