User`s manual

44
44
Interactive pen display
Contents Index
Index
Contents
CUSTOMIZING PEN BUTTONS
Select the PEN tab to change the functions assigned to the side switches and tip of your pen.
Note: Some product configurations may include a pen without side switches.
When you bring the pen tip within
5 mm (0.20 inch) of the pen display
screen surface without touching the
screen and press the upper or lower
side switch, the selected function
occurs.
Tip
: To make double-clicking easier,
set the side switch to double-
click automatically by selecting
D
OUBLE CLICK.
Double-click here to change the function assigned to the
pen tip. The tip must be set to C
LICK in order to draw in
most graphics applications.
You can change the S
IDE SWITCH MODE to fit the
way you like the pen to work when using click
functions.
To access the S
IDE SWITCH MODE settings, click
on the O
PTIONS... button at the bottom of the
control panel. In the O
PTIONS dialog box:
•Select H
OVER CLICK to perform click
functions without touching the pen tip to
the pen display screen surface.
•Select C
LICK & TAP and press the side
switch while touching the pen tip to the pen
display screen surface in order to perform a
click function. C
LICK & TAP enables the
precise placement of your click functions,
and is the default setting for Tablet PCs.
• Choose Right or Left for right-handed or
left-handed orientation.
• Use the Brightness Adjustment slider to set
your preferred brightness for the screen.