User`s manual

Interactive pen display

Contents Index

Index

Contents

CHOOSING CUSTOM MULTI-TOUCH FUNCTIONS

To create custom touch gestures, select the MY GESTURES tab.

TESTING MULTI-TOUCH

If you encounter problems with multi-touch, it is a good idea to first check the assigned touch functions or

reset them to their default conditions.

To further test touch:

1. Attempt to move the screen cursor by touching your finger in different places on the display screen

surface. Touch to select an item. The status LED should brighten when you touch the display screen

surface.

2. Open the Wacom tablet control panel and click on the A

BOUT button. In the dialog box that appears,

click D

IAGNOSE.... The DIAGNOSTICS dialog box shows dynamic information about the pen display and

tools, and appropriate information for touch-sensitive product models.

3. With the D

IAGNOSTICS dialog box open, touch the display screen surface with first one, then with two

fingers. Each time you touch the display screen surface, the tablet status LED should brighten and the

OUCH INFO state should change.

When you are done, click the C

LOSE button to exit the dialog box.

Multi-touch gestures are modified based on

your selection from the drop-down menus, and

are available when selected.

Position the screen cursor over a touch option

to see a static image of that function.

If you do not choose a specific option to view,

then the control panel will display each option

sequentially, from top to bottom.