Specifications

display. Wacom does not allow any pixel to be always white or always
black. A small number of pixels are allowed to show a wrong color for
some parts of the color spectrum. This does not mean the display is
defective.
PEN TABLET SPECIFICATIONS
Reading Technology Electro-magnetic resonance technology
Active Area 293.76 x 165.24 mm
Resolution 0.005 mm/point (5080 lpi)
Accuracy ± 0.2mm (center), the edge area 1 (20mm wide fro edge of display area)
to be ± 0.5mm, the edge area 2 (3mm wide from edge of dsplay area) to
be ± 0.5mm
Reading Height 10 mm or more (Center)
Accuracy Assurance Height 0 mm from cover plate
Maximum Report Rate 180 pps
Pen Tilt Range ± 60 degree (all pens)
Pressure levels 8192 levels - pen and eraser
Communication Interface USB
TOUCH SENSOR SPECIFICATIONS
Technology type Projected capacitive
Active Area 299.04 x 170.88 mm
Resolution 0.025 mm/point
Coordinate Accuracy ± 1mm (Center)
Maximum Report Rate 100 point/sec
POWER ADAPTER SPECIFICATIONS
Input voltage 100 to 240 VAC, 50/60Hz
Output voltage 5V/3A (15W), 20V/5A (100W)
WACOM PRO PEN2 (KP-504E)
Physical size (L x D) 157x15 mm (6.18 x 0.59 in)
Weight 15 g (0.5 oz)
STAND SPECIFICATIONS (DTH-W1321H only)
Angle 0, 17, 31, 43 degrees
Dimension W: 250 × L: 172.5 × H: 3.75 mm (9.84 × 6.79 × 0.14 inch)
(7.7 mm (0.30 inch) included rubber foot)