User's Manual

33
33
Index
Contents
Index
Contents
The pen selects everything,
will not stop selecting.
Open the Pen Tablet control panel. Move the TIP FEEL slider toward
F
IRM. If this does not help, see testing your tablet and pen.
You notice a screen delay at
the beginning of pen or inking
strokes.
Try decreasing the D
OUBLE CLICK DISTANCE (see adjusting tip feel and
double-click).
You have to press hard with
the pen when clicking,
drawing, or writing.
Open the Pen Tablet control panel and go to the Pen tab. Move the T
IP
F
EEL slider toward SOFT.
The pen tip does not function. Be sure you are using the pen that originally came with your pen tablet.
Other pens may not function properly on the Bamboo One tablet.
See t
esting your tablet and pen to verify pen operation. If any of the
tests fail you may have defective hardware.
The upper or lower pen button
does not work.
Be sure you press the pen button when the pen tip is within 5 mm
(0.20 inch) of the tablet active area – do this without pressing down on
the pen tip.
In the Pen Tablet control panel, click on the A
DVANCED button.
If C
LICK & TAP is selected, you will need to first press the pen button and
then touch the pen tip to the tablet surface in order to perform a click
function. See customizing the pen b
uttons.
From the Pen Tablet control panel, verify that the pen button is set to the
function you are expecting to occur.
See t
esting your tablet and pen to verify pen operation. If any of the
tests fail you may have defective hardware.
The screen cursor jumps back. Do not place the pen on the tablet active area when it is not in use or
when you are using another pointing device. Leaving your pen on the
tablet active area may interfere with screen cursor positioning when
using other input devices.
Cannot move the cursor where
you want to on the screen, or
the line you are sketching does
not line up with the location of
the pointer in paint
applications.
Open the Pen Tablet control panel. Verify that P
EN MODE is selected.
If this does not help, click on the D
EFAULT button to reestablish the
default tablet to screen mapping. If you are still having difficulty, remove
the tablet preferences (see next tip).