User's Manual

40
40
Index
Contents
Index
Contents
Double-clicking is difficult. Be sure you are quickly tapping the tablet twice in the same place on the
tablet active area.
Using a pen button to double-click is recommended (review the
techniques in clic
king).
Set one of the tablet ExpressKeys to DOUBLE CLICK and use it to issue
double-clicks.
See adjusting tip f
eel, eraser feel, and double-click:
• Try increasing the DOUBLE CLICK DISTANCE.
• Try using a lighter TIP FEEL.
Windows: Try setting your system to launch programs with a single
click. See clic
king.
The pen selects everything,
will not stop selecting.
Open the Pen Tablet control panel and go to the P
EN tab. Move the TIP
F
EEL slider toward FIRM. If this does not help, see testing your tablet and
tools.
The eraser selects everything
or will not stop erasing.
Open the Pen Tablet control panel and go to the P
EN tab. Move the
E
RASER FEEL slider toward FIRM. If this does not help, see testing your
tablet and tools.
You notice a screen delay at
the beginning of pen or inking
strokes.
Try decreasing the D
OUBLE CLICK DISTANCE (see adjusting tip feel,
eraser feel, and double-click).
You have to press hard with
the pen when clicking,
drawing, or writing.
Open the Pen Tablet control panel and go to the P
EN tab. Move the TIP
F
EEL slider toward SOFT.
The pen tip does not function. Be sure you are using the pen that originally came with your pen tablet.
Other pens may not function properly on the Bamboo Fun tablet.
See t
esting your tablet and tools to verify pen operation. If any of the
tests fail you may have defective hardware.
The upper or lower pen button
does not work.
Be sure you press the pen button when the pen tip is within 5 mm
(0.20 inch) of the tablet active area – do this without pressing down on
the pen tip.
In the Pen Tablet control panel, click on the P
EN tab ADVANCED button.
If C
LICK & TAP is selected, you will need to first press the pen button and
then touch the pen tip to the tablet surface in order to perform a click
function. See customizing the pen b
uttons.
From the Pen Tablet control panel, verify that the pen button is set to the
function you are expecting to occur.
See t
esting your tablet and tools to verify pen operation. If any of the
tests fail you may have defective hardware.