Operators Manual
Table Of Contents
- 1 Preface
- 2 Introduction
- 3 Security
- 3.1 Policy
- 3.2 Areas of responsibility of the operator
- 3.3 Operator responsibilities
- 3.4 Personnel qualification
- 3.5 Residual dangers
- 3.6 General safety instructions
- 3.7 Specific safety instructions – Vibratory plates
- 3.8 General safety instructions - Combustion engines
- 3.9 General safety instructions – fuel, lubricants and coolants
- 3.10 Maintenance
- 3.11 Personal Protective Equipment
- 3.12 Safety devices
- 3.13 Behavior in dangerous situations
- 4 Safety and information labels
- 5 Setup and function
- 6 Components and operator's controls
- 7 Transport
- 8 Operation and use
- 9 Maintenance
- 10 Troubleshooting
- 11 Accessories
- 12 Technical data
- 14 Emission control systems information and warranty
12 Technical data
100_0202_td_0023.fm 35
12.3 Combustion engine
Designation Unit
Manufacturer Honda
Type of engine GX160
Combustion method Four-cycle
Cooling Air cooling
Cylinders 1
Displacement cm³ 163
Max. slanting position ° 20
Fuel type Gasoline
Fuel consumption l/h 0.8
Tank capacity l 3.6
Oil specification SAE 10W-30
Max. oil filling l 0.6
Max. performance kW 3.6
Speed rpm 3,600
Standard SAE J1349
Spark plug model NGK BP-6 ES
Spark plug air gap mm 0.7 - 0.8
Starter type Recoil starter