Operators Manual
Table Of Contents
- 1 Preface
- 2 Introduction
- 3 Security
- 3.1 Policy
- 3.2 Areas of responsibility of the operator
- 3.3 Operator responsibilities
- 3.4 Personnel qualification
- 3.5 Residual dangers
- 3.6 General safety instructions
- 3.7 Specific safety instructions – Vibratory plates
- 3.8 General safety instructions - Combustion engines
- 3.9 General safety instructions – fuel, lubricants and coolants
- 3.10 Maintenance
- 3.11 Personal Protective Equipment
- 3.12 Safety devices
- 3.13 Behavior in dangerous situations
- 4 Safety and information labels
- 5 Setup and function
- 6 Components and operator's controls
- 7 Transport
- 8 Operation and use
- 9 Maintenance
- 10 Troubleshooting
- 11 Accessories
- 12 Technical data
- 14 Emission control systems information and warranty
9 Maintenance
100_0202_mt_0016.fm 23
9 Maintenance
WARNING
Improper handling may result in injury or serious material damage.
Please read and follow all safety instructions in this operator's manual.
WARNING
Danger of poisoning from exhaust fumes.
Exhaust fumes contain poisonous carbon monoxide, which can lead to unconsciousness
or to death.
Only perform maintenance jobs with the engine switched off and the machine
decommissioned.
WARNING
Risk of injury from uncontrolled starting of the machine and moving parts.
Only perform maintenance jobs with the engine switched off and the machine
decommissioned.
WARNING
Risk of fire and explosion from fuel and fuel vapors.
Fuel and fuel vapors can ignite or catch fire and cause serious burns.
Do not smoke.
Do not refuel near open flames.
Switch off the engine and allow to cool before refueling.
WARNING
Warning of hot surfaces
The exhaust system and engine can become extremely hot, which can lead to severe skin
burns.
Always allow the engine to cool down completely after use.
If the cool-down phase cannot be adhered to (e.g. due to an emergency), use heat-
resistant protective gloves.
WARNING
Risk of injury due to non-existent or non-functioning safety devices.
Only operate the machine if the safety devices are properly fixed and functioning.
Do not modify or remove safety devices.