Operators Manual
Table Of Contents
- 1 Preface
- 2 Introduction
- 3 Security
- 3.1 Policy
- 3.2 Areas of responsibility of the operator
- 3.3 Operator responsibilities
- 3.4 Personnel qualification
- 3.5 Residual dangers
- 3.6 General safety instructions
- 3.7 Specific safety instructions – Vibratory plates
- 3.8 General safety instructions - Combustion engines
- 3.9 General safety instructions – fuel, lubricants and coolants
- 3.10 Maintenance
- 3.11 Personal Protective Equipment
- 3.12 Safety devices
- 3.13 Behavior in dangerous situations
- 4 Safety and information labels
- 5 Setup and function
- 6 Components and operator's controls
- 7 Transport
- 8 Operation and use
- 9 Maintenance
- 10 Troubleshooting
- 11 Accessories
- 12 Technical data
- 14 Emission control systems information and warranty
4 Safety and information labels
100_0202_ls_0013.fm 15
Item Label Description
1Start/Stop.
2 Use personal protection equipment in order to prevent injuries
and health hazards.
Ear protection.
Read operator's manual.
Start/Stop description.
3 Falling machines can cause serious injury.
Only lift machine at the central lifting point with certified lifting
gear and tackle (safety load hook).
Do not lift the machine on the central lifting point with an
excavator bucket.
4 Falling machines can cause serious injury.
Do not lift the machine at the control handle.
5 Flames are prohibited.
6 Guaranteed sound power level.
7 Patent pending.
8 US machines Warning.
9 US machines Danger.
0219260
0
2
2
0
0
0
0
0
2
1
9
1
8
1